Table of Contents
Advertisement
TOWING TIPS
KNOWING
Before setting out on a trip, practice turning, stopping,
YOUR
and backing up the trailer in an area located away from
VEHICLE
heavy traffic.
Manual Transmission (for versions/markets,
SAFETY
where provided)
If using a manual transmission vehicle for trailer towing,
all starts must be in FIRST gear to avoid clutch slippage.
STARTING
AND
Automatic Transmission (for versions/
DRIVING
markets,where provided)
WARNING
The DRIVE range can be selected when towing. How-
LIGHTS
ever, if frequent shifting occurs while in this range, use
AND
the AutoStick
MESSAGES
®
NOTE: Using a lower gear while operating the ve-
IN AN
hicle under heavy loading conditions will improve per-
EMERGENCY
formance and extend transmission life by reducing
excessive shifting and heat build up. This action will also
SERVICING
provide better engine braking.
AND
CARE
If you REGULARLY tow a trailer for more than 45
minutes of continuous operation, then change the
transmission fluid and automatic transmission filter as
TECHNICAL
SPECIFICATIONS
specified for "police, taxi, fleet, or frequent trailer
towing." Refer to the "Maintenance Schedule" for the
proper maintenance intervals.
CONTENTS
234
shift control to select a lower gear.
NOTE: Check the transmission fluid level (four-
speed transmission only) before towing. The six-speed
transmission does not require a fluid level check before
towing. If, however, you notice fluid leakage or trans-
mission malfunction, see your authorized dealer imme-
diately for assistance.
Electronic Speed Control (for versions/
markets, where provided)
• Do not use in hilly terrain or with heavy loads.
• When using the speed control, if you experience
speed drops greater than 16 km/h, disengage until
you can get back to cruising speed.
• Use speed control in flat terrain and with light loads
to maximize fuel efficiency.
AutoStick
®
(for versions/markets, where
provided)
– When using the AutoStick
highest gear that allows for adequate performance
and avoids frequent downshifts. For example,
choose "4" if the desired speed can be maintained.
Choose "3" or "2" if needed to maintain the desired
speed.
®
shift control, select the
Advertisement
Table of Contents
