Table of Contents
Advertisement
If the tire does not inflate to at least 26 (1.8 Bar)
KNOWING
pressure within 15 minutes:
YOUR
VEHICLE
• The tire is too badly damaged. Do not attempt to
drive the vehicle further. Call for assistance.
NOTE: If the tire becomes over-inflated, press the
SAFETY
Deflation Button to reduce the tire pressure to the
recommended inflation pressure before continuing.
STARTING
If the tire inflates to the recommended pres-
AND
DRIVING
sure or is at least 26 (1.8 Bar) pressure within 15
minutes:
WARNING
1. Press the Power Button (4) to turn off the TIREFIT
LIGHTS
AND
kit.
MESSAGES
2. Remove the Speed Limit sticker from the top of the
Sealant Bottle (1) and place the sticker on the
IN AN
EMERGENCY
instrument panel.
3. Immediately disconnect the Sealant Hose (6) from
SERVICING
the valve stem, reinstall the cap on the fitting at the
AND
end of the hose, and place the TIREFIT kit in the
CARE
vehicle storage location. Quickly proceed to (D)
"Drive Vehicle".
TECHNICAL
SPECIFICATIONS
CONTENTS
262
• The metal end fitting from Power Plug
(8) may get hot after use, so it should be
handled carefully.
• Failure to reinstall the cap on the fitting at the
end of the Sealant Hose (6) can result in sealant
contacting your skin, clothing, and the vehicle's
interior. It can also result in sealant contacting
internalTIREFIT kit components which may cause
permanent damage to the kit.
(D) Drive Vehicle:
Immediately after injecting sealant and inflating the tire,
drive the vehicle 8 km or 10 minutes to ensure distri-
bution of the TIREFIT Sealant within the tire. Do not
exceed 88 km/h.
WARNING!
TIREFIT is not a permanent flat tire
repair. Have the tire inspected and re-
paired or replaced after using TIREFIT. Do not
exceed 88 km/h until the tire is repaired or
replaced. Failure to follow this warning can result
in injuries that are serious or fatal to you, your
passengers, and others around you.
Advertisement
Table of Contents
