Table of Contents
Advertisement
TO DISARM THE SYSTEM
KNOWING
The Vehicle Security Alarm can be disarmed using any
YOUR
of the following methods:
VEHICLE
• Press the UNLOCK button on the Remote Keyless
Entry (RKE) transmitter.
SAFETY
• Grasp the Passive Entry Unlock Door Handle with a
valid key fob available in the same exterior zone
STARTING
(refer to "Keyless Enter-N-Go™" in "Knowing Your
AND
Vehicle" for further information).
DRIVING
• Cycle the vehicle ignition system out of the OFF
WARNING
position by pressing the Keyless Enter-N-Go™
LIGHTS
Start/Stop button (requires at least one valid Key Fob
AND
MESSAGES
in the vehicle).
NOTE:
IN AN
EMERGENCY
• The driver's door key cylinder and the liftgate button
on the RKE transmitter cannot arm or disarm the
Vehicle Security Alarm.
SERVICING
AND
• When the Vehicle Security Alarm is armed, the
CARE
interior power door lock switches will not unlock
the doors.
TECHNICAL
SPECIFICATIONS
CONTENTS
18
The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
system will give you a false alarm. If one of the previ-
ously described arming sequences has occurred, the
Vehicle Security Alarm will arm regardless of whether
you are in the vehicle or not. If you remain in the
vehicle and open a door, the alarm will sound. If this
occurs, disarm the Vehicle Security Alarm.
If the Vehicle Security Alarm is armed and the battery
becomes disconnected, the Vehicle Security Alarm will
remain armed when the battery is reconnected; the
exterior lights will flash, the horn will sound. If this
occurs, disarm the Vehicle Security Alarm.
SECURITY SYSTEM MANUAL OVERRIDE
The system will not arm if you lock the doors using the
manual door lock plunger.
Advertisement
Table of Contents
