Table of Contents
Advertisement
2. Pull the release loop forward to release the latch
KNOWING
and seat cushion. (fig. 128)
YOUR
VEHICLE
3. Lift the seat cushion up and push back to lock it in
the booster seat position. (fig. 129)
4. Place the child upright in the seat with their back
SAFETY
firmly against the seatback.
5. Grasp the latch plate and pull out the seat belt.
STARTING
AND
6. Slide the latch plate up the webbing as far as neces-
DRIVING
sary to allow the seat belt to go around the child's
lap.
WARNING
LIGHTS
NOTE: The lap portion of the seat belt should be low
AND
MESSAGES
on the hips and as snug as possible.
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
(fig. 128)
182
Release Loop
7. Once the seat belt is long enough to fit properly,
insert the latch plate into the buckle until you hear
a "click." (fig. 130)
8. To remove the slack from the lap belt, pull upward
on the shoulder portion of the seat belt.
9. To release the seat belt, push the red button on the
buckle.
(fig. 129)
Booster Seat
Advertisement
Table of Contents
