Table of Contents
Advertisement
Do not attempt to raise the vehicle by
KNOWING
jacking on locations other than those
YOUR
VEHICLE
indicated in the Jacking Instructions for
this vehicle.
(fig. 154)
SAFETY
1. Remove the spare tire, jack, and jack-handle from
stowage.
STARTING
2. Loosen, but do not remove, the wheel nuts on the
AND
DRIVING
wheel with the flat tire. Turn the wheel nuts coun-
terclockwise one turn while the wheel is still on the
WARNING
ground.
LIGHTS
AND
3. Place the jack underneath the lift area that is closest
MESSAGES
to the flat tire. Center the jack saddle between the
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
(fig. 154)
252
Jacking Locations
drain flute formations on the sill flange. Turn the
jack screw clockwise to firmly engage the jack saddle
with the lift area of the sill flange. (fig. 155)
(fig. 156)
4. Raise the vehicle by turning the jack screw clock-
wise with the jack handle. Raise the vehicle until the
tire just clears the road surface and enough clear-
ance is obtained to install the spare tire. Minimum
tire lift provides maximum stability.
(fig. 155)
Front Jacking Location
Advertisement
Table of Contents
