Table of Contents
Advertisement
audio for Channel 1 has been muted using the
KNOWING
remote control's MUTE button.
YOUR
VEHICLE
3. Channel 2 Audio Only/Mute — Audio: Only in a
single screen system: The audio only icon is dis-
played on Channel 2 when Channel 1 is in a video
SAFETY
mode. Mute: when the Mute icon is displayed, the
audio for Channel 2 has been muted using the
remote control's MUTE button.
STARTING
AND
4. Channel 2 Mode — Displays the current source for
DRIVING
Channel 2.
WARNING
5. Channel 2 ENTER Button Action — When the
LIGHTS
ENTER button on the remote control is pressed
AND
MESSAGES
with the "INPUT FILE #" button visible on the
screen, the screen shows a numeric entry keypad
IN AN
which allows you to enter a specific track number
EMERGENCY
on data discs and HDD (see Numeric Keypad Menu
section of this manual). Also, Enter Button Action –
SERVICING
"INPUT TRK #" to enter a specific track number on
AND
audio discs.
CARE
6. Remote Locked Out — When the icon is displayed,
the remote control functions are disabled.
TECHNICAL
SPECIFICATIONS
7. Clock — Displays the time.
8. Channel 1 Shared Status — When the icon is
displayed, the audio for Channel 1 is also shared
CONTENTS
with the radio and playing through the cabin speak-
ers.
158
Mode Selection Menu
(fig. 112)
The first press of the MODE button causes the Mode
Selection menu to appear on screen. The current mode
is always the default selection. The mode can be
changed for either Channel/Screen 1 or Channel/
Screen 2 using the remote control.
Use the remote control's navigation buttons (▴, ▾, , ◂)
to navigate through the available modes, and then press
the remote control's ENTER button to select the
mode. An alternate method of changing modes is
repeated pressing of the MODE button until the de-
sired mode is highlighted then press the ENTER button
on the remote control to select the mode.
(fig. 112)
Mode Selection Menu
Advertisement
Table of Contents
