Installing A Fixed-Disk Drive In Position D - IBM RT PC Options Installation

Installing a Fixed-Disk Drive in Position D

Handle the fixed-disk drive carefully. Dropping,
Warning:
shaking, or rough handling can damage both the drive and any
stored data and can cancel the warranty.
The fixed-disk drive types installed in drive positions C and D
must be the same drive type. The drives do not operate correctly
if drive types are mixed.
Refer to the system unit diagram in Appendix A to locate drive
position D.
Refer to "Handling Static-Sensitive Drives" on page 2-4 before
beginning this section.
Warning: Follow all instructions under "Removing the Covers
From the System Units" on page 1-4 before installing the second
drive.
Section 2. Removing and Installing Drives in IBM 6150 2-23