Fixed-Disk Drive Removal - IBM 6150 Hardware Maintenance Manual

Fixed-Disk Drive Removal
Follow the Handling a Fixed-Disk Drive procedures. If needed, see Section
8.
1. Do the "Side Cover Removal" on page 4-14.
2. Do the "Cooling Fan Assembly Removal" on page 4-50.
3. Disconnect the ground wire.
4. Disconnect the power cable.
5. Disconnect the signal cable.
6. Disconnect the data cable.
Data Signal
Power
Ground
CtO;":CI
J
i,:,;:;:,:,::,~
conneClO
a
~r,e
II
~
...
--.'--_
....
.,...--~-~---... ~
Drive Position C
Drive Position E
4-28 Service Manual