Operating Instructions - IBM RT PC Options Installation

9-8 Options Installation
10. Do you see the following information on the display screen?
DIAGNOSTIC OPERATING INSTRUCTIONS
This diskette contains diagnostics and utilities for your system. You should
use these procedures whenever you are having problems with your system
which have not been corrected by any software application procedures
available.
In general, the procedures will run automatically. However, sometimes you
will be required to select options, tell the system when to continue, and do
simple tasks and exchange diskettes.
Yes. Go to the next step.
No. Go to Step 37.
11. Read the DIAGNOSTIC OPERATING INSTRUCTIONS.
Some of the key functions are listed below, in case you need them.
• Enter continues the procedure or performs an action.
• End stops a test or an action.
• F10 returns to the previous menu and cancels any changes.
• Escape resets the procedures and returns to the Diagnostic

Operating Instructions.

• Page Down lets you see information below that shown on the
screen.
• Page Up lets you see information above that shown on the
screen.
• Backspace lets you correct errors.
CONTINUE TO THE NEXT PAGE
DIAG-1