Fixed-disk Drive Removal
1. Do the "Top Cover Removal" on page 4-12.
2. Pull on the latch wire to release the diskette drive, then slide the drive
part way out of the system unit.
3. Pull on the latch wire to release the fixed-disk drive, then slide the drive
part way out of the system unit.
4. Disconnect the ground wire.
5. Disconnect the power cable.
6. Disconnect the signal cable.
7. Disconnect the data cable.
4-28
Service Manual
Signal
Connector
~
. .
-
~
_-f1\JlllllliIIIIIIIIIIIilIIIIIIIIIIIIIL
Data
Connector
Power
Connector
Ground
Wire