IBM RT PC Options Installation page 16

How to Use This Book
xvi Options Installation
Read Section 1, "Getting Started" for instructions on removing the
covers from the system units. Read this section when installing
options in a new system or when adding options to a system already
in use.
Both system units are shown in many drawings. Select the
appropriate drawing for reference.
To protect yourself and the equipment, do the steps in order and
carefully read and follow the instructions under the Warning and
Caution notices.
Section 2, "Removing and Installing Drives in the IBM 6150 System
Unit" gives instructions for installing the optional fixed-disk and
diskette drives.
The instructions in Section 3, " Installing the Adapters" provide
general information for installing the optional adapters and the
system unit covers.
Section 4, "Processor Options" through Section 8, "Additional
Options" contain the information needed to install the different
optional adapters.
Section 9, "Checking Out the Option Installation" provides a
detailed procedure to ensure that the options you installed have
been recognized by and properly integrated within the system unit.
A Reader's Comment Form and Book Evaluation Form are provided
at the back of this book. Use the Reader's Comment Form at any
time to give IBM information that may improve the book. After you
become familiar with the book, use the Book Evaluation Form to give
IBM specific feedback about the book.