About This Section - IBM RT PC Options Installation

About This Section

This section gives general instructions for handling drives to prevent
damage from static electricity discharge.
Instructions are also given for installing and removing additional
fixed-disk drives, drive adapters, and the second diskette drive.
For a drawing of the drive positions, see the IBM 6150 system unit
diagram in Appendix A.
CAUTION
Before doing any procedure, turn off power to the system
unit and all connected devices, and unplug system unit
and device power cables from electrical outlets. Refer to
"Safety Notice Translations" on page iii.
Section 2. Removing and Installing Drives in IBM 6150 2-3