12V Trigger Out Jack - Pioneer SC-LX904 Instruction Manual

Contents Connections Playback Setup
≫ ≫ ≫ ≫

12V TRIGGER OUT jack

When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD
player to this unit, the device can be turned on or set to standby by interlocking
ZONE B
(LINE OUT)
the operation on this unit. When the desired input is selected on the unit, power
link operation will be activated with a control signal of maximum 12 V/100 mA
from the 12V TRIGGER OUT A jack or maximum 12 V/25 mA when using the
12V TRIGGER OUT B jack. You can select the zone to output the control signal
by setting each of the inputs.
• For connection, use a monaural mini plug cable (ø1/8"/3.5 mm) without
resistance. Do not use a stereo mini plug cable.
a
BD/DVD
a Monaural mini plug cable (ø1/8"/3.5 mm)
91
Front Panel≫ Rear Panel≫ Remote≫