Preamp Mode; Firmware Update; Initial Setup; Lock - Pioneer SC-LX904 Instruction Manual

„ Preamp Mode
If speakers are connected to the PRE OUT jacks on this unit via a power
amplifier, you can reduce the power consumed by this unit by turning off the
power supplied to the SPEAKERS terminals you are not using on this unit.
Setting Item Default Value

Preamp Mode

No
Setting Details
Select the SPEAKERS terminals whose power you
want to turn off.
"No": Power is supplied to all SPEAKERS
terminals.
Select when a power amplifier is not connected.
"Front": Turns off the power for the SPEAKERS
terminals for the front speakers.
"Front + Center": Turns off the power for the
SPEAKERS terminals for the front speakers and
center speaker.
"All": Turns off the power for all SPEAKERS
terminals. Select when this unit is to be used as the
pre-amplifier.
• This setting cannot be selected when bi-amp
connection is used for front speakers. Only
"Front" can be selected when bi-amp connection
is used for the center speaker and surround
speakers.
Contents Connections
≫
„ Firmware Update
Change the settings for Firmware Update.
Setting Item Default Value
Update Notice Enable
Version -
Update via -
NET
Update via -
USB
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
„ Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
„ Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value
Setup Parameter Unlocked
177
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Availability of a firmware update is notified via
network.
"Enable": Notify updates
"Disable": Do not notify updates
The current firmware version is displayed.
Press ENTER to select when updating the firmware
via network.
• This setting cannot be selected if you do not
have Internet access or there is no updatable
firmware.
Press ENTER to select when updating the firmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
firmware in the USB storage device.
Setting Details
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
≫