Fine Speaker Distance - Pioneer SC-LX904 Instruction Manual

Setting Item Default Value Setting Details
Surr Back Right 0.0 dB Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Surround
Back Left speaker, so adjust the volume so it
becomes the same.
Subwoofer 1 0.0 dB Select a value between "–15.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this subwoofer and the benchmark Front
Left speaker, so adjust the volume so it becomes
the same.
Subwoofer 2 0.0 dB Select a value between "–15.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this subwoofer and the benchmark
Subwoofer1, so adjust the volume so it becomes
the same.
Contents Connections
≫
„ Fine Speaker Distance
Make fine adjustments to the distance of the speakers from the listening position
while listening to the test pulse. After firstly setting the measured distance of the
Front Left speaker from the listening position, adjust the distance of the other
speakers, starting with the Front Right speaker. The test pulse is output from the
selected speaker and the benchmark speaker, so adjust the distance so the point
where the test pulse is heard is in the middle of the two speakers.
Setting Item Default Value
Front Left 10' 0" / 3.00 m
Front Right 10' 0" / 3.00 m
Center 10' 0" / 3.00 m
Height 1 Left 10' 0" / 3.00 m
Height 1 Right 10' 0" / 3.00 m
Height 2 Left 10' 0" / 3.00 m
Height 2 Right 10' 0" / 3.00 m
182
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Set the measured distance of the Front Left
speaker from the listening position.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and the
benchmark Height 1 Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Left speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
The test pulse is output from this speaker and
the benchmark Front Right speaker, so adjust the
distance so the point where the test pulse is heard
is in the middle of the two speakers.
≫