Power Management - Pioneer SC-LX904 Instruction Manual

Setting Item Default Value Setting Details
Audio TV Out Off You can enjoy audio through the speakers of the
TV while this unit is on.
"On": When this function is used
"Off": When this function is not used
• This setting is fixed to "Auto" if you have set
• Listening mode cannot be changed while "Audio
• Depending on your TV or input signal of the
• Audio is output from this unit if you operate the
Audio Return Off You can enjoy the sound of an HDMI-connected
Channel (eARC ARC-compatible TV or eARC-compatible TV
supported) through the speakers connected to the unit.
"On": When enjoying the TV sound through the
speakers of this unit
"Off": When the ARC function or eARC function is
not used
PQLS Off Enables high-quality playback of audio from AV
components that support PQLS (Precision Quartz
Lock System) connected by HDMI.
"On": When this function is used
"Off": When this function is not used
Contents
"Input/Output Assign" - "TV Out/OSD" - "HDMI
Out" or "HDMI" - "HDMI Out" in "AV Adjust" to
"MAIN" or "MAIN+SUB" and "HDMI CEC" is set
to "On". If you change this setting, set "HDMI
CEC" to "Off".
TV Out" is set to "On" and audio is being output
from the TV.
connected device, audio may not be output from
the TV even if this is set to "On". In such a case,
audio is output from the speakers of the unit.
MASTER VOLUME dial on this unit when audio
that is input to this unit is output from your TV
speakers. If you do not want to output audio,
change the setting of this unit or TV, or reduce
the volume of this unit.
Connections
≫
Setting Item Default Value
Auto Delay On
„ Power Management
Change the settings for the power-save function.
Setting Item Default Value
Sleep Timer Off
Auto Standby On/Off
168
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
This setting automatically corrects
desynchronization between the video and audio
signals based on the information from the HDMI Lip
Sync-compatible TV.
"On": When enabling the automatic correction
function
"Off": When not using the automatic correction
function
Setting Details
You can allow the unit to enter standby
automatically when the specified time elapses.
Select a value from "30 minutes", "60 minutes" and
"90 minutes".
"Off": The unit does not automatically enter standby
mode.
This setting allows the unit to enter standby mode
automatically after 20 minutes of inactivity without
any video or audio input. (When "USB Power Out
at Standby" or "Network Standby" is enabled, the
unit enters the HYBRID STANDBY mode which
minimizes the increase in power consumption.)
"On": The unit automatically enters standby mode
("AUTO STBY" lights up).
"Off": The unit does not automatically enter standby
mode.
• "Auto Standby" is displayed on the main unit's
display and TV screen 30 seconds before
entering standby mode.
• "Auto Standby" does not work when Zone 2/
Zone 3 is active.
• Default values vary depending on the regions.
≫