5.1 Channel System (Bi-Amping The Speakers) - Pioneer SC-LX904 Instruction Manual

„ 5.1 Channel System (Bi-Amping the Speakers)
You can build a 5.1 Channel System (
that support Bi-Amping. The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure
to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers.
Refer to the instruction manual of your speakers as well.
The following shows the combinations you can connect with Bi-Amping speakers.
– Front speakers only
– Front speakers and center speaker
– Front speakers and surround speakers
– Center speaker and surround speakers
– Front speakers, center speaker, and surround speakers
Contents
ZONE B
(LINE OUT)
For high-
frequency
For low-
frequency
p19) by connecting front speakers, a center speaker, and surround speakers
Connections
≫
52
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p203)
Speaker Setup
5.1 ch
1 ch
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker
Speaker B
Zone 2
Zone 2 Preout
Front
• Speaker Channels: 5.1 ch
• Subwoofer: 1ch
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: No
• Speaker B: No
• Zone 2 Preout: Set any value
( p159)
• Bi-Amp: Select from the Bi-Amping
combinations actually connected.
• Symmetry / All Channel Adjust / Front
Align ( p203)
≫