Pioneer SC-LX904 Instruction Manual page 191

Setting Item Default Value Setting Details
Height 2 Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the front left speaker, upon which
Height 2 Right - Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the front right speaker, upon which
Surround Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the front left speaker, upon which
Surround Right - Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the front right speaker, upon which
Surr Back Left - Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the surround left speaker,
Contents
calibration is based, during the adjustments.
calibration is based, during the adjustments.
calibration is based, during the adjustments.
calibration is based, during the adjustments.
upon which calibration is based, during the
adjustments.
Connections
≫
Setting Item Default Value
Surr Back Right -
191
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Move the speakers back and forth about a
centimeter at a time in relation to the speaker setup
microphone so that "Score" becomes "10.0". If the
number does not become "10.0", put the speaker in
the position where the maximum value is achieved.
• Do not move the surround right speaker,
upon which calibration is based, during the
adjustments.
≫