Inputting Characters - Pioneer SC-LX904 Instruction Manual

Inputting Characters

You can input characters or symbols on the keyboard displayed on the TV screen
such as when inputting a password for Wi-Fi Setup (
preset radio station ( p165).
1. Select a character or symbol with the cursors
controller and press the ENTER button.
2. When saving characters after input, select "OK" and press the ENTER button.
, , . . ; ;
/
MODE
/ / /
ENTER
p195) or naming a
/ / / on the remote
: :
]
ZONE 2 CLEAR
Contents Connections
≫
• Select "A/a" to switch between upper and lower cases. (Can also be switched
with the MODE button on the remote controller.)
• To enter a space, select " ".
• To delete a character on the left of the cursor, select " ".
• To delete all the input characters, press the CLEAR button on the remote
control.
• On the ZONE 2 playback screen, operate the remote controller while pressing
and holding the ZONE 2 button.
148
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫