Connecting External Control Devices; Ir In/Out Port - Pioneer SC-LX904 Instruction Manual

Connecting External Control Devices

IR IN/OUT port

ZONE B
(LINE OUT)
Contents
When connecting a remote control receiver unit consisting of an IR Receiver, etc.
to this unit, operation using the remote controller is possible even if the remote
control signal is difficult to reach (due to installation in the cabinet, etc.). It is also
possible to operate this unit from other room such as ZONE 2 with a remote
controller, or operate other devices with the remote controller by connecting
other devices to this unit. For adopting a remote control receiver unit, contact the
specialized stores.
• For the type of cable required for connection, refer to the operation manual,
IR Receiver
90
Connections
≫
etc. of the remote control receiver unit.
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫