Manual MCACC
When Full Auto MCACC is run, a variety of speaker settings are made
automatically, but Manual MCACC enables you to make further adjustments
manually, giving you the opportunity to make even more detailed settings.
• Before making these adjustments, run Full Auto MCACC first.
• Depending on the settings, speakers may emit test tones at high volume
during measurement, so be careful of your surroundings.
• If multiple settings are saved in the MCACC Memory, press
controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" -
"MCACC Memory".
Fine Channel Level
Adjust the volume level of the speakers while listening to the test tone. After firstly
adjusting the Front Left speaker to the desired volume, adjust the volume level
so that each channel is the same level, starting from the Front Right speaker.
Test tone output alternates between the selected speaker and the benchmark
speaker, so adjust the volume so it becomes the same.
Setting Item
Default Value
Front Left
0.0 dB
Front Right
0.0 dB
Center
0.0 dB
on the remote
Setting Details
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Front Left
speaker, so adjust the volume so it becomes the
same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Front Left
speaker, so adjust the volume so it becomes the
same.
Contents
Connections
≫
Setting Item
Default Value
Height 1 Left
0.0 dB
Height 1 Right
0.0 dB
Height 2 Left
0.0 dB
Height 2 Right
0.0 dB
Surround Left
0.0 dB
Surround Right
0.0 dB
Surr Back Left
0.0 dB
181
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
Setting Details
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Front Left
speaker, so adjust the volume so it becomes the
same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Height 1
Left speaker, so adjust the volume so it becomes
the same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Front Left
speaker, so adjust the volume so it becomes the
same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Height 2
Left speaker, so adjust the volume so it becomes
the same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Front Left
speaker, so adjust the volume so it becomes the
same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Surround
Left speaker, so adjust the volume so it becomes
the same.
Select a value between "–12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). Test tone output alternates
between this speaker and the benchmark Surround
Left speaker, so adjust the volume so it becomes
the same.
≫