7.1 Channel System (Bi-Amping The Speakers) + Zone Speaker - Pioneer SC-LX904 Instruction Manual

„ 7.1 Channel System (Bi-Amping the Speakers) + ZONE SPEAKER
MAIN ROOM
ZONE 2
You can configure a 7.1 Channel System (
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
MAIN ROOM: This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back
speakers.
ZONE 2:
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
Contents
ZONE B
(LINE OUT)
For high-
frequency
For low-
frequency
p20) by connecting front speakers that support Bi-Amping connection.
Connections
≫
60
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p203)
Speaker Setup
7.1 ch
1 ch
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker Zone 2
Speaker B
Zone 2 Preout Zone 2
Front
• Speaker Channels: 7.1 ch
• Subwoofer: 1ch
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: Zone 2
• Speaker B: No
• Zone 2 Preout: Zone 2
• Bi-Amp: Front
• Symmetry / All Channel Adjust / Front
Align ( p203)
≫