Miscellaneous; Tuner; Remote Id - Pioneer SC-LX904 Instruction Manual

Miscellaneous

„ Tuner
Change the frequency step for the tuner.
Setting Item Default Value
AM / FM 10 kHz / 0.2
Frequency Step MHz
(North American
models)
AM Frequency 9 kHz
Step
(European
models)
AM Noise Cut 1
Mode
Setting Details
Select a frequency step to suit your residential
area.
Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz".
• When this setting is changed, all radio presets
are deleted.
Select a frequency step to suit your residential
area.
Select "10 kHz" or "9 kHz".
• When this setting is changed, all radio presets
are deleted.
You can improve reception sensitivity by changing
this mode if you are finding AM broadcasts difficult
to hear. Select "1" or "2".
Contents Connections
≫
„ Remote ID
Change the remote controller ID.
Setting Item Default Value

Remote ID

1
176
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Pioneer components that are
installed in the same room. After changing the ID
on the main unit, change the ID on the remote
controller accordingly with the following procedure.
While pressing and holding the MODE button,
press the following buttons for approx. 3 seconds.
• To change the remote controller ID to "1": AUTO/
DIRECT
• To change the remote controller ID to "2":
SURROUND
• To change the remote controller ID to "3":
STEREO
≫