Playing Back On Multiple Devices (Airplay2) - Pioneer SC-LX904 Instruction Manual

Playing Back on multiple devices (AirPlay2)

Wi-Fi
iPhone
XXXXXX
Pioneer SC-LX904
XXXXXXXX
Pioneer
XXXXXXXX
Pioneer
Contents
≫
This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later,
you can play the music of the iOS device on this unit and other devices that
support AirPlay2.
1. Connect the iOS device to the access point where this unit is connected via
network.
2. Tap the AirPlay icon
iOS device, and select this unit and AirPlay2-supported devices to play from
the displayed devices.
• AirPlay2-supported devices are displayed with white circle on the right side.
• Multiple AirPlay2-supported devices can be selected.
• The volume can be adjusted on individual devices.
3. Play the music file on the iOS device.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off " in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function (
p169) is set to On.
• Due to the characteristics of AirPlay wireless technology, the sound produced
on this unit may slightly be behind the sound played on the AirPlay-enabled
device.
You can also play the music files on a PC with iTunes (Ver. 12.8 or later)
equipped. Confirm that this unit and the PC are connected to the same network
beforehand. Then, press NET on the remote controller. Next, click the AirPlay
icon
displayed devices, and start play of a music file.
e.g., iOS 11.4
100
Connections
≫
on the play screen of the music play application on the
in iTunes, select this unit and AirPlay2-supported devices to play from the
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫