Connect Power To A Dc-Powered Services Gateway - Juniper SRX5800 Getting Started Manual

Figure 11: Connecting AC Power to the Services Gateway (High-Capacity Power Supplies )
d. Dress each power cord appropriately. Verify that the power cord does not block the air exhaust or
access to services gateway components, and that it does not drape where people could trip over
it.

Connect Power to a DC-Powered Services Gateway

WARNING:
to ensure proper operation, you must properly ground the services gateway chassis
before connecting power. See
instructions.
To meet safety and electromagnetic interference (EMI) requirements and
"Step 4: Connect the Grounding Cable" on page 13
21
for