Step 5: Connect External Devices And Network Cables - Juniper SRX5800 Getting Started Manual

Figure 7: Connecting the Grounding Cable
M6 (Metric)
Grounding Point
8. Verify that the grounding cabling is correct, that the grounding cable does not touch or block access
to services gateway components, and that it does not drape where people could trip over it.
Proceed to "Step 5: Connect External Devices and Network Cables" on page

Step 5: Connect External Devices and Network Cables

IN THIS SECTION
Connect to a Network for Out-of-Band Management | 15
Connect a Management Console | 15
Connect the Network Cables | 15
To connect external devices and network cables:
1/4-20 Grounding Point
14.
14