Configure System Attributes - Juniper SRX5800 Getting Started Manual

2. Configure an administrator account on the device. When prompted, enter the password for the
administrator account.
[edit]
root@# set system login user admin class super-user authentication plain-text-password
New password: password
Retype new password: password
3. Commit the configuration to activate it on the services gateway.
[edit]
root@# commit

Configure System Attributes

1. Log in as the administrative user that you configured earlier.
2. Configure the name of the services gateway. If the name includes spaces, enclose the name in quotation
marks (" ").
configure
[edit]
admin@# set system host-name host-name
3. Configure the IP address and prefix length for the services gateway Ethernet interface.
[edit]
admin@# set interfaces fxp0 unit 0 family inet address address/prefix-length
4. Configure the traffic interface.
[edit]
admin@# set interfaces ge-4/2/0 unit 0 family inet address address/prefix-length
admin@# set interfaces ge-4/3/5 unit 0 family inet address address/prefix-length
27