then {
permit;
}
}
}
}
}
3. Commit the configuration to activate it on the services gateway.
[edit]
admin@# commit
4. Optionally, configure additional properties by adding the necessary configuration statements. Then
commit the changes to activate them on the services gateway.
[edit]
admin@# commit
5. When you have finished configuring the services gateway, exit configuration mode.
[edit]
admin@# exit
admin@>
Safety Warnings
WARNING:
is a summary of safety warnings. For a complete list of warnings for the services gateway,
including translations, see the SRX5800 Services Gateway Hardware Documentation at
www.juniper.net/documentation/.
See installation instructions before you connect the services gateway. This
31