How To Use Timer Operation - Rinnai RDT-62-RM-W Operating Instructions Manual

How to Use Timer Operation

• Decide on the drying operation time and perform drying. (Operation automatically
stops after a fi xed amount of time regardless of how dry the clothes are.)
Caution
• Before opening or closing the front door, make sure that there are no people or obstacles in the
immediate surrounding area, and gently open or close with your hand on the door. Opening or
closing the door with excessive force may cause an injury or damage the equipment.
Information
• When the front door is opened during operation, the operation/combustion lamp lights (green)
and operation stops. Drying operation is resumed when the front door is closed. (If the front door
is left open for five minutes or more, the buzzer sounds "2 short continuous beeps repeated non-
stop". Close the front door. The buzzer stops sounding, and the dryer automatically stops after
cool operation.)
1
Put clothes inside, close the front door, and press
Clicks
in place
31
2 2
Open the front door.
Put in sufficiently spun-
dried clothes one at a
time while removing their
wrinkles.
Close the front door.
3
Lights (green)
Information
• After the first use, the previously selected drying course is displayed.
1
Note
• If clothes are dried while they
are still spun-dried, the clothes
might become entangled or
wrinkled. Be sure to smooth out
wrinkles before putting clothes
in the dryer.
• Automatic operation is not
matched to how dry the clothes
are. If the clothes are insufficiently
dry, perform operation again.
.
Short beep
Hold down until
you hear a short
beep.