Rinnai RDT-62-RM-W Operating Instructions Manual page 48

Displayed Messages
Display
For displays marked by *, the buzzer
does not sound.
<blinks>
<blinks>
<blinks>
<blinks>
<blinks>
<out>
Display other than the above
47
Drum rotation sensor
(drum rotation abnormality)
Fan rotation sensor
(discharge fan rotation
abnormality)
Ignition/light out safety interlock
(ignition failure for 5 times
continuous)
Error can be Drum rotation sensor
canceled (drum rotation abnormality)
Fan rotation sensor
Error cannot
(discharge fan rotation
be canceled
abnormality)
Overheat prevention device
(thermocouple)
Overheat prevention device
(temperature fuse)
*
Overcurrent prevention device
(current fuse)
Safety interlocks other than the
above
Safety Interlock
Gas supply is stopped and cool operation is
automatically started when the drum does not rotate
or drum rotation is insufficient.
Gas supply is stopped and cool operation is
automatically started when the discharge fan does
not rotate, drum rotation is insufficient or the drum
rotates abnormally.
Gas supply is stopped and cool operation is
automatically started when lighting of the pilot light
fails (continuously for 5 times) during ignition.
Gas supply and operation are stopped when the
drum does not rotate or drum rotation is insufficient.
Gas supply is stopped and cool operation is
automatically started when lint blocks the lint filter
or when the inside of the equipment overheats
abnormally.
Gas supply, operation are stopped when the inside
of the equipment overheats abnormally.
The current fuse and gas supply and operation are
stopped when an overcurrent flows.
A safe shutdown occurs when an abnormality
other than the above occurs.
Function