Rinnai RDT-62-RM-W Operating Instructions Manual page 12

Safety Precautions
Power Cord and Plug
• Do not remove or insert with wet hands.
This may cause electric shock or injury.
Wet Hands
Prohibited
• Do not extend power cords by cutting them.
Install the equipment within reach of the power cord to the power outlet.
This may cause electric shock or injury.
• Do not connect damaged power cords or plugs to power outlets or use power
outlets with loose connections.
Doing so may cause an electric shock or generate heat, and result in fire.
• Do not remove the power plug by pulling the power cord.
When removing the power plug, do not pull it by its power cord but remove it by holding the power
plug. Tugging the power cord may damage it, which may result in an electric shock, short circuit or
fire or cause the equipment to malfunction.
• Do not use the equipment above the rating of the power outlet or wiring
appliance. Use the equipment with only a 240 V alternating current (AC) power
supply. Do not use with other power supplies.
When the designated rating is exceeded, for example, by using a multi-outlet extension cord, this
may generate heat, and result in fire.
• Do not exert unnecessary force or place heavy objects on the power cord, or use
the power cord in a bundled state.
This may cause electric shock or injury.
• Firmly insert power plugs into power outlets as far as they can go.
Failure to do so may cause an electric shock or generate heat, and result in fire.
• Periodically remove dust, etc. from power plugs.
Remove the power plug and wipe clean with a dry cloth. Accumulation of dust on the power plug
may cause power insulation resulting from moisture, etc. or cause fire.
11
(Actual Use)