How To Use Drying Course Operation - Rinnai RDT-62-RM-W Operating Instructions Manual

How to Use Drying Course Operation

• Select the drying course to match the type of clothes.
Caution
• Before opening or closing the front door, make sure that there are no people or obstacles in the immediate surrounding area, and gently open
or close with your hand on the door. Opening or closing the door with excessive force may cause an injury or damage the equipment.
Information
• When the front door is opened during operation, the operation/combustion lamp lights (green)
and operation stops. Drying operation is resumed when the front door is closed. (If the front door
is left open for five minutes or more, the buzzer sounds "2 short continuous beeps repeated non-
stop". Close the front door. The buzzer stops sounding, and the dryer automatically stops after
cool operation.)
1
Put clothes inside, close the front door, and press
Clicks
in place
27
Open the front door.
Put in sufficiently spun-
dried clothes one at a
time while removing their
wrinkles.
Close the front door.
2
Lights (green)
Information
• After the first use, the previously selected drying course is displayed.
3 1
Note
• If clothes are dried while they are
still spun-dried, the clothes might
become entangled or wrinkled. Be
sure to smooth out wrinkles before
putting clothes in the dryer.
.
Short beep
Hold down until
you hear a short
beep.