Setting Mode And Monitor Mode - Daikin VRV IV-S RXTQ-TAVJU Series Service Manual

SiUS331604E
3.2

Setting Mode and Monitor Mode

The following 3 modes can be changed over with the button switches on the PCB and you can find the present
mode by the status of the H1P indicator.
(1) Setting mode 1 (H1P off)
Initial status (normal) : Also indicates during abnormal.
(2) Setting mode 2 (H1P on)
Used to modify the operating status and to set program addresses, etc. Usually used in servicing the system.
(3) Monitor mode (H1P blinks)
Used to check the program made in setting mode 2.
Press the BS1 (MODE button) for more
than 5 seconds.
Select a setting item with
the BS2 (SET button).
Select a setting condition
with the BS2 (SET button).
Setting condition
(Contents) display
Field Setting
BS1
(MODE)
H1P
Setting mode 2
ON
MODE
Press the BS3 (RETURN button).
Press the BS3 (RETURN button).
Press the BS3 (RETURN button).
Press the BS1 (MODE button).
H1P H3P H5P H7P
H2P H4P H6P
BS2 BS3
BS4
(SET)
(RETURN) (TEST)
Setting mode 1
Press the BS1 (MODE button).
(Initial condition)
H1P
OFF
MODE
Select a check item with
the BS2 (SET button).
Contents display
Field Setting from Outdoor Unit
BS5
(RESET)
H1P
Monitor mode
Blinking
MODE
Press the BS3 (RETURN button).
Press the BS3 (RETURN button).
Press the BS1 (MODE button).
100