Table of Contents
Advertisement
15.6.4.3 Mapping – Indications
Parameter
Name
Register type
Data format on bus
(See following table.)
Register number
Bit offset
(only relevant for register types
Input register or Holding register)
Data Format on Bus
1 Bit
1 Bit in UInt32
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Default Setting
Indication x Slv 1
(x = 1 to 15)
-none-
1 Bit
1
0
Description
1 bit (for all register types; addition-
all select Bit offset for Input regis-
ter and Holding register)
1 bit in 2 successive Input registers
or Holding registers which have to
be read together.
15 Operating Parameters
Setting Range
Max. 31 characters
-none-
Coil status registers
Input status registers
Input registers
Holding registers
For -none-, the assignment is ignored
and the corresponding indication cannot
be selected for other functions.
1 Bit
1 Bit in UInt32
Data format which is used to transmit the
indication via Modbus
1 to 65 535
0 to 15 (for Data format 1 Bit)
0 to 31 (for Data format 1 Bit in UInt32)
depending on selection for Data format
on bus)
Setting Range
Invalid recognition
0 = of
none
1 = on
0 = of
none
1 = on
15.6 Administrative
365
Advertisement
Table of Contents
