Table of Contents
Advertisement
8.3.7.4.4
Mapping – Export
Several Modbus slave devices of the same type can be connected to SICAM Q100. This is the case, for
example, if feeders that are configured identically exist in a substation. These devices frequently read the
same data then.
You can use the export function of the device to export the configuration of a Modbus slave device (for example,
Modbus slave device 1) which is parameterized in SICAM Q100 to the connected PC. After that, you can import
this configuration from the PC either into this SICAM Q100 (for example, Modbus slave device 3) or into other
SICAM Q100 devices.
✧
Click the button Export.
The input/output window Modbus RTU master displays the Modbus slave device and the dialog File
download.
Figure 8-63
✧
In the dialog File download, click Save or Open.
File download Save
✧
In the dialog File download, click Save.
The Save in: dialog opens.
✧
Select the file path.
✧
Use the file name suggested in the File name: list box or enter a new file name with the file extension .txt.
✧
Click Save.
The Download complete dialog opens.
✧
In the dialog Download complete, click Close.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Export
8 Operation at Use of a PC
8.3 Configuration of the Device
205
Advertisement
Table of Contents
