Table of Contents
Advertisement
NOTE
The active and passive set of parameters are listed in the Activation input/output window in the Set column
for your information.
NOTE
During the parameter activation, the device is working under special mode. If one kind of recorders happen in
this duration, the integrity of the recorded data can not be guaranteed.
Save Configuration to File
You can save both the active and the passive configuration to a file. Proceed as follows:
✧
In the navigation window, select the Finish configuration menu and click Save Configuration to File.
Figure 8-20
✧
Click either Save active configuration or Save passive configuration.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Configure Tab, Save Configuration to File Input/Output Window
8 Operation at Use of a PC
8.3 Configuration of the Device
135
Advertisement
Table of Contents
