Table of Contents
Advertisement
Settings for Binary Outputs in the SICAM I/O Unit
Table 8-32
Indication
(can be set individually for all relay outputs)
Source inverted
(can be set individually for all relay outputs)
Operating mode
(can be set individually for all relay outputs)
To change the outputs of a binary output, proceed as follows:
✧
In the navigation window, select the Operational parameters menu, then the Process connections
submenu and click Binary outputs.
Figure 8-70
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Settings of the Binary Outputs in the SICAM I/O Unit Subdevice
Parameter
Configure Tab, Binary Outputs of SICAM I/O Unit Input/Output Window
Default Setting
-none-
See Device Manual
SICAM I/O Unit 7XV5673
no
no
yes
Persistent
See Device Manual
SICAM I/O Unit 7XV5673
8 Operation at Use of a PC
8.3 Configuration of the Device
Setting Range
215
Advertisement
Table of Contents
