Table of Contents
Advertisement
9 Operation at Use of the Display
9.4 Parameterization
Table 9-11
State
Clear min/max values
Reset counters
Execute...
(prompt whether selected function is
executed)
Password Protection
If you have selected the option Use password = no on the HTML page (see Chapter 8.3.4.1), you can use the
softkeys to parameterize the device without entering a password.
If you have selected the option Use password = yes on the HTML page (see Chapter 8.3.4.1), you must first
enter the activation password (default setting 000000) before you can edit the device settings. A prompt is
displayed for this purpose.
After you have entered the correct password, you can edit the parameterization using the softkeys within the
next 15 minutes. After this time you have to re-enter the password at the device.
298
Advanced Settings (cont.)
ON
ON
OFF (O)
acc. to current configuration
Reset
-
Yes (checkmark)
No
-
Yes (checkmark)
No
-
Confirm with Enter
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Advertisement
Table of Contents
