8 Operation at Use of a PC
8.4 Value View and Evaluation
8.4
Value View and Evaluation
8.4.1
Process Connections and Automation Functions
The values for Operational parameters (Process connections and Automation functions) are displayed in
the Value view and Evaluation tab. To display the values on the screen, proceed as follows:
✧
Select the Value view and Evaluation tab on the user interface.
Figure 8-73
✧
In the navigation window, open the Operational parameters menu, then the Process connections or
Automation functions submenu and click one of the following items:
AC operational values
Harmonics voltage
Harmonics current
Interharmonics voltage
Interharmonics current
AC power and energy
Flicker
Binary status: see chapter 8.4.1.2
Modbus slave devices: see chapter 8.4.1.3
SICAM subdevices: see chapter 8.4.1.4
Load profile: see chapter 8.4.1.5
Tariff (TOU): see chapter 8.4.1.6
Limits
Group indications
222
Value View and Evaluation Tab
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018