Overview Of [Factory] Menu - Furuno FAR-2107 Series Service Manual

4.2 Overview of [FACTORY] Menu

Menu Sub Menu-1
1 BACK
2 LANGUAGE
FACTORY
3 FACTORY
DEFAULT
4 FACTORY
TEST
Note:
Following settings are retained even after "FACTORY DEFAULT" is executed.
1) [Menu] -> 0 [INITIALIZE] -> 4 [INSTALLATION]
-> 4 RADAR NO
-> 6 MODEL
-> 7 TYPE
-> 0 PM GAIN ADJ
2) [Menu] -> 0 [INITIALIZE] -> 7 [NETWORK]
-> RADAR, CARD-1, CARD-2
(IP Address, Subnet mask, default gateway)
3) [FACTORY] menu
[Menu] -> 2 [LANGUAGE]
Sub
Menu-2
Switch the language display. (English/Japanese)
E/J When changing the language display, turn off the
power once.
Return all the settings to the factory default setting.
Select "FACTORY DEFAULT" and click the left
Note
button. Or clicking the [ENTER] key 5 times.
See page. 6-17.
4-2
4.2 Overview of [FACTORY] Menu
Table 4.2.1 [FACTORY] Menu
Remarks