Furuno FAR-2107 Series Service Manual page 76

Factory-modified sets: From production in August 2007
Fixing EMI Core onto New IF AMP Case
The EMI core is fixed onto new IF AMP case as illustrated below.
1. Enter a cable tie about half way through the cable tie holder.
Cable tie holder, TMS-20
2. Fix the EMI core with the cable tie. See Fig.3. (The EMI core is fixed temporarily before
mounting the IF AMP case.)
3. Ground the shielding tube with a grounding cable clamp, E0809A and M4x10 Sems screw
fixing the IF AMP case cover. See Fig.4.
EMI core
Fig.3 Fixing EMI Core
RSB-098-080: R138-1843 and after
RSB-099-080: R139-0888 and after
RSB-101-080: R141-0104 and after
Cable tie, CV-200HT
Fig.2 New IF AMP case (Bottom view)
M4x10 Sems
Grounding cable clamp, E0809A
A
A=15 to 25 mm
Fig.4 Grounding Shielding Tube
Shielding tube
2/2