Processor Unit (Rpu-013) - Furuno FAR-2107 Series Service Manual

7.3 Processor Unit (RPU-013)

7.3.1 Overview
Processor unit is comprised of SPU, NET-100, PWR, TX-HV, TB and FIL boards. This
unit is used commonly to X-band and S-band radars and different outputs. However, the
power supply board and TX-HV board are different depending on the output power,
antenna resolution speed and TX output power. See page.4-64 to 4-71 for related
information. To connect with external monitors and VDR, the DVI IF board, RGB
buffer board and AD converter (GC-10 board) are available as option.
HDG SENSOR
LOG
PC
NAV DATA
ECDIS
AIS
TRACK CONTROL
AD-10
ALARM IN/OUT
I/O port
GC-10
(64P1106A)
RFCp.c.b
(03P9346A)
TB
(03P9342)
24V-
POWER
HV
TX-HV
(AC: 03P9339)
(HV9017)
(DC: 03P9338)
Ship's Main
FIL
(AC: 03P9341)
(DC: 03P9352)
Fig. 7.3.1 Block diagram of RPU-013
TRK RD OPHD/BP/Trig/Video
EXT ALM ACK ANT 12V ON
EXT ALM1-4 GC LED/HOLD/UP/DOWN
KEY TX/RXD AIS TD/RD
RS232 TX/RX LOG RD
-12/Vcc RF Tx/Rx Data
GC 5V GYRO RD
ANT ON
ANT SPEED
BP
5/+12/-12V
MON MOTOR VLT
SPU
POWER FAIL
(03P9337)
SXGA
SXGA
7-27
7.3 Processor Unit: RPU-013
TRACKBALL
(RCU-015)
STD CONT
(RCU-014)
RSV1-3 TD
NAV RD
ARPA TD
AD-10
OP1, 2 HD/BP/Trig/Video
Processor unit
(RPU-013)
R/G/B
H-SYNC
V-SYNC
RGB
DVI IF
BUFFER
LAN
NET-100
(03P9332)