Applicable Model: Far-2837Sw - Furuno FAR-2107 Series Service Manual

Marine radar/arpa

Hide thumbs Also See for FAR-2107 Series:

Table of Contents

4. Applicable model: FAR-2837SW

As for the description on the De-icer and Performance monitor; PM-51, the same as

given in the above clause "3. FAR-2x37S" is applied. The Gearbox and Transceiver unit;

RTR-082 are connected by a waveguide. Install the Transceiver unit in such a way as to

minimize the length of the waveguide for minimizing the loss of the waveguide. And, it

has to keep more than specified bent radius because the loss becomes greater.

100/110/200/220VAC

For ANT motor power supply

(Transformer)

(Transformer)

(Transformer)

Fig. 1.2.10 Configuration of 30 kW S-band Waveguide Type Radar

Table 1.2.6 Configuration of 30 kW Waveguide Type S-band Radar

(200 VAC/3 Ph/50 Hz)

(220 VAC/3 Ph/60 Hz)

(380 VAC/3 Ph/50 Hz)

(440 VAC/3 Ph/60 Hz)

(Transformer)

Length of waveguide:

Recommended dimension is less than 30 m.

Specifications of bend radius for

- Bend radius (single): more than R150 mm

- Bend radius (repeated): more than R250 mm

1.2 Configuration

Table of Contents