Picture] - Furuno FAR-2107 Series Service Manual

[PICTURE]

Optimum picture setting can be made individually according to the sea conditions, for
instance, for seeing a far target or the near target. See the next page for the default setting.
Setting values are not dependant on the type of IMO, A, B C and W.
[PICTURE MENU]
1 INT REJECT
OFF/1/2/3
2 ECHO STRETCH
OFF/1/2/3
3 ECHO AVERAGE
OFF/1/2/3
4 NOISE REJ
OFF/ON
5 AUTO STC
OFF/ON
6 AUTO RAIN
OFF/1/2/3/4
7 VIDEO CONTRAST
1/2/3/4/
A/B/C
8 [PULSE]
9 [CONDITION]
0 DEFAULT (ENTER X 3)
Menu
1 INT REJECT
2 ECHO STRETCH
3 ECHO AVERAGE
4 NOISE REJ
5 AUTO STC
6 AUTO RAIN
Cont'd
[PULSE MENU]
1 BACK
2 0.5NM
S1/S2
3 0.75NM
S1/S2/M1
4 1.5NM
S1/S2/M1
5 3NM
S2/M1/M2/M3
6 6NM
M1/M2/M3/L
7 12 -24NM
M2/M3/L
[CONDITION MENU]
1 BACK
2 SEA CONDITION
1/2/3/4/5
3 ANT HEIGHT
5/7.5/10/15/20/
25/30/ 35/40/45/
more 50 m
4 STC RANGE
+00
Submenu
OFF/1/2/3
OFF/1/2/3
OFF/1/2/3
OFF/ON
OFF/ON
OFF/1/2/3/4
Table 3.2.9 PICTURE Box Menu
Rejects radar interfering from other ships
** OFF -> 1 -> 2-> 3: Strong **
The number of dots of echo display is increased to
stretch echoes.
- ES1: Enlarged in the bearing direction for long
range detection.
- ES2: Enlarged in the range direction.
- ES3: Enlarged in the bearing direction and range
direction.
EAV1 and 2 are used when there are heavy sea
clutters. EAV3 is used for long-range to enhance
weak echoes.
Turns on and off the rejection of noise such as white
noise. Echoes are integrated to reduce noises.
One scan is divided into 32 sectors and the STC
curve is automatically generated for each section.
Use manual A/C SEA control to adjust the STC
level.
Allows setting for the FTC function.
Echoes are differentiated. Use manual Auto Rain
control more than 20 to as well.
** OFF -> 1 -> 2-> 3 -> 4: Strong **
3-15
3.2
Description
Box Menu Box Menu
Box Menu Box Menu