Introduction; Setting Endpoint Preferences - Inter-Tel 8664 User Manual

I
NTRODUCTION
Now that you've mastered the basics, it's time to move on to the advanced features. In
this section, you'll learn how to set preferences for your endpoint, program buttons,
use directories, access your voice mailbox remotely, and perform various other func-
tions.
S E
ETTING NDPOINT
Your endpoint is automatically set to specific defaults. You can, however, configure
many of these settings at any time. Customizable features on your endpoint include
changing the ring type, eliminating background noise with the high noise feature,
enabling and disabling the Push-to-Talk (PTT) feature (Model 8665 only), and select-
ing a PTT channel (Model 8665 only). An asterisk (*) indicates that an option is
selected.
When the endpoint is in idle mode, press
through the menu, use the buttons and softkeys listed in the following table.
Up/Down buttons
Select button
OK softkey
Save softkey
Bksp softkey
Cncl softkey
Up softkey
Exit softkey
End Call key
In addition to the endpoint configuration options mentioned above, you can view cer-
tain administrator settings from this menu such as IP Address, etc. Only your admin-
istrator can change these options.
56
P
REFERENCES
BUTTON
Display previous/next menu item
Selects the menu item or option
Selects the menu item or option
Saves the entry
Backspaces to allow editing of entry
Cancels edit and returns to previous menu level
Returns to previous menu level
Exits the menu (at the top level)
Exits to idle state (from any level)
to display user options. To navigate
FCN
ACTION
®
Inter-Tel Model 8664/8665/8668 User Guide