Charge Indicator; Dual Charger - Inter-Tel 8664 User Manual

To use the desktop charger to charge the battery pack:
EITHER, Press
1.
the endpoint in idle mode.
OR, Press and hold
Place the endpoint into the desktop charger slot facing forward. If the endpoint
2.
is placed correctly, the red indicator light will come on.
NOTE:
empty, if it is not receiving power, or if the endpoint is seated incorrectly.

Charge Indicator

While the endpoint is charging in idle mode, it will display its extension number and
Charging.... The battery icon will show charging progress. The endpoint is fully
operational and will ring if called.
When the endpoint is charging while turned off, only Charging... will display and no
calls will be received. The dots will be racing during the charging cycle. It is normal
for the battery pack to become warm when charging.

Dual Charger

Overview
The dual charger is a two-slot desktop charger that comes in three models. Model
8664 is designed to charge the BPE100 battery pack in the Model 8664 endpoint and
a spare BPE100 battery pack; Model 8665 is designed to charge the BPX100 battery
pack in the Model 8665 endpoint and a spare BPX100 battery pack; Model 8668 is
designed to charge the BPN100 battery pack in the 8668 endpoint and a spare
BPN100 battery pack. The models are not interchangeable.
16
(once or twice depending on the current display) to place
to power off the endpoint.
The desktop charger's indicator light will not come on if the charger is
Dual Charger for Model 8664 Dual Charger for Model 8665
®
Inter-Tel Model 8664/8665/8668 User Guide