Function Button And Softkeys - Inter-Tel 8664 User Manual

Function Button and Softkeys

Your endpoint has a
features. To access the function features, the endpoint must be in active mode (see
page 12). Pressing
to view the sixteen available function features. To access a feature displayed on the
function menu, press the feature's associated dialpad number or softkey. While the
four-line function display is showing, all button presses relate to the function options
only.
The following table lists the available function features and the default dialpad and
softkey buttons that are associated with the feature. For detailed instructions on how
to access the features listed, refer to the corresponding page number.
Place a call on Hold.
Access the Message menu or toggle between alpha/numeric mode.
Mute the microphone, or backspace.
Forward a call to another destination or voice mail, or forward space.
Transfer a call to another destination or voice mail.
Communicate with several different parties on one call.
Enable and disable Do-Not-Disturb mode.
Redial an outside number or save the last number dialed.
View or access System Speed-Dial numbers.
View or access Station Speed-Dial numbers.
Access additional features using feature codes.
Access programmable buttons for specific features.
NOTE:
Depending on how your telephone system is configured, you may need to use
Feat
the softkey before you dial a feature code.
10
(Function) button that provides access to frequently used
FCN
repeatedly scrolls through the softkey displays, and allows you
FCN
FUNCTION
DIALPAD
SOFTKEY
BUTTON
Hold
Msg
Mute
Fwd
Xfer
1
Conf
2
DND
3
Redl
4
SySp
5
StSp
6
Feat
7
Pgm1vt
8
Pgm2
9
Pgm3
0
Pgm4
*
Pgm5
#
®
Inter-Tel Model 8664/8665/8668 User Guide
PG.
34
42
41
38
36
35
52
40
70
67
N/A
73