York YCWL0056SE Installation Operation & Maintenance page 99

FORM 201.26-NM1
ISSUE DATE: 1/19/2018
TWO INCH DEFLECTION SEISMIC ISOLATOR CROSS-REFERENCE
3/8" GAP
Ø3/4"
TYP.(4)
3/4"
7/8"
NOTES:
1. ALL DIMENSIONS ARE IN INCHES, INTERPRET PER ANSI Y14.
1. All dimensions are in inches, interpret per ANSI
2. STANDARD FINISH: HOUSING-POWDER COATED (COLOR:BLACK), SPRING-POWDER COATED (COLOR: SEE T
Y14. HARDWARE ZINC-ELECTROPLATE.
3. EQUIPMENT MUST BE BOLTED OR WELDED TO THE TOP PLATE TO MEET ALLOWABLE SEISMIC RATINGS.
4. ALL SPRINGS ARE DESIGNED FOR 50% OVERLOAD CAPACITY WITH EXCEPTION OF THE 2D-3280N & 2D-2870
2. Standard finish: housing-powder coated (color,
5. REFER TO PAGE
black), spring-powder coated (color, see table be-
6. CONSULT FACTORY FOR CONCRETE INSTALLATION.
low) hardware - zinc-electroplate.
3. Equipment must be bolted or welded to the top
plate to meet allowable seismic ratings.
MODEL Y2RSI-2D SEISMICALLY RESTRAINED VIBRATION ISOLATOR FOR 2" DEFLECTION
MODEL NUMBER
Y2RSI-2D-460
Y2RSI-2D-710 DARK BROWN
Y2RSI-2D-870
Y2RSI-2D-1200N
Y2RSI-2D-1690
Y2RSI-2D-2640N
Y2RSI-2D-2870N PINK/GRAY/ORANGE
Y2RSI-2D-3280N
JOHNSON CONTROLS
Units shipped on or after June 15, 2008
1-1/8"
5"
5/8"
2-3/4"
2-3/4"
12-1/4"
14"
FOR INSTALLATION INSTRUCTIONS.
ISOL. COLOR WEIGHT RANGE (LBS)
GREEN Up thru 391
392 thru 604
RED 605 thru 740
RED/BLACK 741 thru 1020
PINK 1021 thru 1437
PINK/GRAY 1438 thru 2244
2245 thru 2618
PINK/GRAY/
2619 thru 3740
DK.BROWN
Y2RS
12"
5/8-11UNC
TYP. (4)
1/2" LIMIT
STOP &
NUT
8-3/8"
OPER.
HEIGHT
3-1/2"
3/8"
5"
4. All springs are designed for 50% overload capac-
ity with exception of the 2D-3280N and 2D-2870.
5. Refer to next page for installation instructions.
6. Consult factory for concrete installation.
WEIGHT RANGE (KGS)
UP TO 177
178 - 274
275 - 336
337 - 463
464 - 652
653 - 1018
1019 - 1188
1189 - 1696
SECTION 5 – TECHNICAL DATA
LD13761A
YORK P/N
029-25336-006
029-25336-008
029-25336-009
029-25336-010
029-25336-011
029-25336-012
029-25336-013
029-25336-014
99
5