Output - Roland V-600UHD Reference Manual

Menu List

Output

HDMI OUT1–3 0 [VALUE]
Menu item Value
Signal Bus
PGM, PVW, AUX
Disabled, Enabled
Down Convert
Signal Type HDMI, DVI-D
Color Gamut Rec.709, Rec.2020, RGB Full, RGB Limited
(*1) HDMI OUT 1 : PGM, HDMI OUT 2: PVW, HDMI OUT 3: AUX
SDI OUT 0 [VALUE]
Menu item Value
Signal Bus PGM / Disabled
Disabled, Enabled
Down Convert
Level A
3G-SDI Mapping
MULTI-VIEW 0 [VALUE]
Menu item Value
Layout
Upper Left,
PGM
Label
Pressing the [VALUE] knob displays the following label entry screen.
PGM PGM
PVW
PVW
XPT1 CH.1
XPT2 CH.2
XPT3 CH.3
CH.4
XPT4
XPT5 CH.5
XPT6 CH.6
CH.7
XPT7
XPT8 CH.8
30
(Bold: default)
(*1)
(Bold: default)
(Bold: default)
Upper Right, Lower Left, Lower Right
Explanation
This sets the bus to be sent to HDMI OUT 1–3 connectors.
This specifies whether down convert from 4K to FHD is enabled or
disabled.
* Available when Output Format is set to "2160p(UHD)" or
"3840x2160. "
This sets the output mode for HDMI output.
This part select color gamut or color spaces
Explanation
This part displays the output status of SDI Output.
This is fixed at PGM in the case of video resolution, and fixed at
Disabled in the case of PC resolution.
This specifies whether down convert from 4K to FHD is enabled or
disabled.
* Available when Output Format is set to "2160p(UHD). "
This displays the mapping structure for 3G-SDI output.
Explanation
This switches the position of PGM in Multi-View display.
To edit the label name, move the cursor to the label name and press
the [VALUE] knob.
To confirm the label name, move the cursor to "Execute" and press
the [VALUE] knob.
* If you do not change the PGM setting of Layout, the changed
label name may not be reflected.