Multi-View Monitor Display - Roland V-600UHD Reference Manual

Panel Descriptions

Multi-View Monitor Display

An input/output video list (final output, preview output, and input channels 1–8) and menus are displayed on a multi-view monitor connected to
the MULTI-VIEW connector.
Pressing the [MENU] button displays the menu superimposed over the multi-view (p. 7).
1
3
No. Name
1 PVW (preview) section
2
PGM (program) section
3
CH 1–8 section
MEMO
You can change the label names displayed on the multi-view monitor.
Use the [MENU] button&"System"&"Output"&"MULTI-VIEW"&"Label, " then change the label name.
6
Explanation
This displays the preset video (the video to be output next).
This displays the final output video.
This monitors the video input via channels 1–8.
A red border is displayed around the final video output. A green border is displayed around the preset
video (the video to be output next).
* Settings for scaling (p. 11) is not applied.
* Changing the channel assignments at the cross-point (p. 24) also changes the order of displayed
sources.
2